CONTROL SYSTEM:

The company has developed its own high-speed motion control system with

independent intellectual property rights, which can quickly draw various complex

graphics, and is perfectly compatible with the CA system to achieve data interoperation,

which is more convenient and quick to operate.

TWO SETS OF COEFFICIENT PROGRAMS

※There is no need to reduce the ratio, only need to input the 1:1 floor plan of the tablet. There is no need to

calculate the thickness of the board, no need to measure the dotting point.This technology has exceeded any

domestic laser machine and similar products (has been declared national patent)

※Conventional calculation method of circular mold shrinkage ratio.

THE MACHINE STRUCTURE：

※The A3 wall panel with thickness of 20mm was fixed on both sides, laser cutting and machining center were made.

※Machine wall rod, machine head beam, processing center production.

※Cooling water tank of machine head, made of 304 stainless steel.

※Select 3 high pressure screw fans for dust absorption to effectively suck out floating and sinking.(has declared national patent)

※Omron brand is used in all electric applications.

※All bearings are of NSK brand.

※Choose 45# steel for the Y-axis, the thickness is 16mm after machining, and the surface accuracy is 3.2 after grinding.

※All personal service motors are used.

※The protective cover is all made of 2mm thick cold plate.

FOLLOW-UP STRUCTURE

The surface deformation data within 0.1 of the template surface can be measured with the laser follow-up system.(non-infrared)

HEAD China-switzerland technical cooperation product, motor spindle can reach 24000 revolutions per minute.

PLATE MAKING Cut at one time, cut hole, no manual work is required.(except milling cutter breaking).

MOTION STRUCTURE

Adopt Taiwan Yintai import ball screw, guarantee the machine high speed and smooth running and high precision.

TRANSMISSION SYSTEM:  adjustable dimensions of XYZ triaxial can be controlled by computer or pulse handwheel.

WORK TABLE

Independently developed and designed the QCJ self-locking system, with the plate edge control at 15mm.(has declared national patent)

MILLING CUTTER

The cutter USES steel imported from Germany.

SUPPORT SOFTWARE AUTOCAD GRAPHIC FORMAT DXF

SIMULATION  Figure input system, in case of drawing error, or missing processing, normal processing 1-50 times the speed of

simulation work, to ensure that no waste.

CUTTER BREAKING

※Select the point with the mouse, and directly find the point on the graph for processing.

※At any point, as long as the machine head is moved to the break point (no need for accuracy, roughly position), the system will

automatically calibrate and locate the machine until it is processed

※Probe to measure the cutter. Automatic alarm and automatic stop after cutter breaking（Optional）。